LUBRICANT & COOLANTS



Tamson Foaming Bath (8 Positions)

ASTM D892 D6082, IP 146, ISO 6247

The Tamson D892 apparatus (P/N 00T0330) consists of two baths - one for 24°C and one for 93.5°C conform to ASTM D892

The apparatus completely made of stainless steel construction with zincor powder coated case around glass jar. Each bath has four openings to immerse foam cylinders and has bath volume of 31 litres. Fitted with long shaft stainless steel electric stirrer and twin-cooling coils enables bath to be used interchangeably.

The Tamson D892 apparatus is standard delivered with two foaming baths, four 1000 ml foam cylinders, four stoppers with inlet and outlet tubings, four flowmeters, one rack support to hold up to four cylinders and a spill tray.

BENEFITS OF TAMSON FOAMING BATH

  • Up to four positions per bath (leads to increased sample throughput)

  • Temperature stability ±0.01°C

  • Top cover with clamps to securely hold the foam cylinder and overcome buoyancy

  • Rack equipped with spill tray can hold up to four test cylinders and four stoppers (when foam cylinders not in use or when cooling in between Seq II and Seq III)

  • Provision to mount drying tower on the rack

SAFETY

  • Drain outlet to safely remove bath fluids

  • Safety device for over temperature with alarm

  • Safety device for low liquid level

  • Removable outside window panels for cleaning purposes

SPECIFICATION

TEMPERATURE RANGE : Ambient to 100°C

TEMPERATURE ACCURACY: ±0.01°C

DISPLAY RESOLUTION : 0.01°C

POSITIONS : 8

AIR FLOW RATE : 0 to 115 ml/min with 0.1% F.S. accuracy

BATH VOLUME : 31 litres